2012-08-17
RecoverAzboxKernel344
How to recover a blocked Azbox in Booting
2012-03-16
AZUp_2.1.6
2011.06.10
DREAMSET 2.34  
Dreamset is a settings editor for digital satellite receivers running Enigma 1, Enigma 2 and Neutrino Plus firmwares like DreamBox. AZBOX E2 receivers are also supported.
2011.02.25
project-valerie_rev474_mipsel_oe16
How to Install project-valerie_rev474_mipsel_oe16.ipk :
Put file project-valerie_rev474_mipsel_oe16.ipk bu FTP in /tmp
Connect by telnet on AzBox and execute this command :
cd /tmp
opkg install project-valerie_rev474_mipsel_oe16.ipk
After you have installed Valerie, unpack file Files.zip and transfer files :
em8634dvb.ko and irvfd.ko to /lib/modules/2.6.22.19-19-the_ripper/extra
libshowiframe.so.0.0.0 to /usr/lib/enigma2/python/Plugins/Extensions/ProjectValerie
Wizard.py to /usr/lib/enigma2/python/Screens
After that, reboot your device.
NOTE: Stop button is mapped to Resolution button.
PC App : project-valerie_rev420_pc.tar is application to use on PC and to manage Valerie.
DOWNLOAD files
2011.02.14
azup v 1.2.8
new version azup 1.2.8
2011.01.02
Dreamboxedit
Changelog: 4.0.1.1 - fixed alternatives filename generation - fixed error message after opening  Enigma1 settings - fixed total service counter was overlapped  by displayed service counter after startup without settings  - language files updated
2010.01.09
JaZUp by Hectore and Pr2
Java based application to flash E2 firmware on Azbox and return to official Firmware.
2010.12.08
RecoverAzbox 
How to recover a blocked Azbox in Booting
Here you can find the needed part
2010.10.28
project-valerie
Mediacentre voor Azbox E2
Mediacentre voor Azbox E2
2010.12.27
AZUp 1.2.6
Please use AzUP v1.2.6 by telesat to Flash this new RTi core 1.0.3 BETA version of Enigma 2 in Your receiver including the KERNEL!!! , and read Release notes of AzUP v1.2 ***
2010.11.28
AZUp 1.2.5
please read info how to use
2010.10.26
AZUp 1.1
how to use azup
Use AzUP v1.1 for Flashing this version of Enigma 2 into Your devices !!!
2010.10.26
bootup.zip
If You installed latest version of Enigma 2 in Your AzBox HD and boot stop on 24-25%, dont worry You can easy fix it.
Download bootup.zip file,
unpack it and You will have file without extension bootup.
Now, go in RESCUE MODE,
read IP address from Receiver display,
and Telnet to Your receiver (e.g You can use putty).
When You are asked for username ( root ) and password ( azbox ).
Now, execute this commands :
mkdir /D
mount /dev/hda1 /D
Now, use an FTP client, and connect on same IP address which was on VFD.
Enter in /D/etc/init.d
Transfer new bootup file, and when asked for Overwrite, click Yes.
Remove USB Memory stick, which You used to enter in RESCUE MODE,
turn off receiver by back panel power switch, and turn it on.
Enigma 2 on Your receiver will boot normally.